low voltage 4 core aluminum power cable with CE listed
Construction:
Number of cores: 1 .2.3.4.5,3+1,3+2,4+1 cores
Relative manufacturing standards: IEC60505, BS, DIN.
Packing: Wooden drum, steel wooden drum or as your request
Power Cable (structure)
-Conductor:
Solid or stranded copper or aluminum
-Insulation:PVC
-Circuit Identification:
The insulation shall be red, black
-Filler:
Polypropylene lament with lapped binding tape
-Inner Sheath:
Polyvinyl chloride (Black)
-Core-covering:
Binding tape
-Outer Sheath:
Polyvinyl chloride (Black)
-Application: for laying indoor,tunnel,canal and underground.
Using features
1. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long term is no more than 5 seconds). The highest temperature for conductor is no more than 250 degrees.
2 . D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.
3 . The environment temperature should be no lower than 0 when lay. Otherwise it should be preheate d.
4.The cable is laid without horizontal drop limit. The Min. Bending radius of three core cable should be no smaller than 12 times of cable outer diameter.
5.. Working Frequency Voltage Test:.
For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture.
6 . Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.
Audited Supplier 
){kind=link}
){kind=link}