Galvanized Steel Armor Mc Cable 12/2 12/3 14/2 14/3 with PVC Jacket

• Customization: Available
• Type: Insulated
• Conductor Type: Solid
• Model NO.: mc
• Application: Underground
• Conductor Material: Copper or Aluminum
• Sheath Material: PVC
• Insulation Material: PVC
• Material Shape: Round Wire
• Range of Application: Commercial, Industrial
• Certification: ISO9001, CE, CCC, RoHS, VDE
• Brand: Huatong
• Voltage: Low Voltage 600V, 2000V
• Armored Material: Aluminum/Steel Interlock
• Certificate: UL
• Package: Roll/Drum
• Transport Package: Coils and Drums
• Specification: 12AWG to 2000KCMIL
• Trademark: HT CABLES
• Origin: China
• HS Code: 8544492100
• Production Capacity: 200000m/Month

Product Description

 

Product Description

 

APPLICATION
Type MC Cable - Isolated Ground is constructed with soft-drawn copper, Type THHN/THWN
conductors rated 90°C dry available in sizes 12 AWG and 10 AWG, and two insulated grounding conductors--one solid green and the second green with yellow stripes. The conductors are cabled together and a binder tape bearing the print legend is
wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. 

Type AC Cable BX is constructed with soft-drawn copper, Type THHN insulated conductors which are
individually wrapped with a moisture-resistant, flame-retardant paper covering. Aluminum interlocking armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length.


 

Power Tray Cable Applications

• Type MC Cable is suitable for use as follows:
  • Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
  • Power, lighting, control, and signal circuits.
  • Fished or embedded in plaster.
  • Concealed or exposed installations.
  • Environmental air-handling spaces per NEC 300.22 (C).
  • Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
  • Installation in cable tray and approved raceways.
  • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
  • Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.

 

• Type AC Cable is suitable for use as follows:
  • Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
  • Power, lighting, control, and signal circuits.
  • Dry locations only.
  • Fished or embedded in plaster.
  • Concealed or exposed installations.
  • Environmental air-handling spaces per NEC 300.22 (C).
  • Installation in cable tray and approved raceways.
  • Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).

STANDARDS & REFERENCES

Type AC Cable meet or exceeds the following requirements
• UL 4, 83, 1581, 2556
• Federal Specification A-A59544 (formerly J-C-30B)
• National Electrical Code Article 320 Armored Cable: Type AC

Type MC Cable meets or exceeds the requirements of the following
• UL 83
• UL 1569
• UL 1685
• Federal Specification A-A59544 (formerly J-C-30B)
• FT4/IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
• NEC
• Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems

CONSTRUCTION

Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry
available in sizes 14 AWG through 2 AWG, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.

Type AC Cable is constructed with soft-drawn copper, Type THHN insulated conductors which are
individually wrapped with a moisture-resistant, flame-retardant paper covering. Aluminum interlocking armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length.
.

Conductor Size	Solid or Stranded	Grounding Conductor Size	Overall Diameter	Weight	Ampacity (Amps)
(AWG)		(AWG)	(inches)	(lbs./1000ft.)	60	75	90
14-2	Solid	14	0.439	77	15	15	15
14-3	Solid	14	0.464	94	15	15	15
14-4	Solid	14	0.494	112	15	15	15
12-2	Solid	12	0.527	137	20	20	20
12-3	Solid	12	0.505	129	20	20	20
12-4	Solid	12	0.539	155	20	20	20
10-2	Solid	10	0.542	150	30	30	30
10-3	Solid	10	0.58	189	30	30	30
10-4	Solid	10	0.623	229	30	30	30

Company Profile